Slide the area from 200 to 2,500 sq ft — a typical two-car driveway is 500–700 — then pick the service: sealcoating at $0.35–0.65 per square foot, crack fill and patching, resurfacing at $4–7.50, full asphalt replacement at $8–14, interlock pavers or exposed aggregate concrete. Toggles cover tearing out the old surface, regrading for drainage and adding a curb or border course. The default 600 sq ft overlay estimates $2,400–4,500.
Sealcoating existing asphalt runs $0.35–0.65 per square foot — roughly $210–390 on a typical 600 sq ft two-car driveway. It is the cheapest line in the calculator and the one that postpones the expensive ones.
An overlay prices at $4–7.50 per square foot and suits a driveway whose base is still sound. Full asphalt replacement runs $8–14, exposed aggregate concrete $14–24, and interlock pavers $19–32. A site visit settles which one the base can actually take.
A typical two-car driveway measures 500–700 square feet; the calculator defaults to 600. Measure the paved length times width, include the apron, and set the slider to match before comparing services.
Every calculator runs from one config: your name, your colours, your prices. Brand it below, open any tool from the catalogue, and finish a quote — the lead lands in the table here the moment the estimate unlocks. On your own site the widget works exactly like this.
| Captured | Name | Contact | Tool | Job value |
|---|---|---|---|---|
| No leads yet — run any tool in the catalogue and finish the quote. | ||||
| Tenants signed | Avg. rent | Monthly | Annual |
|---|